You will Receive: Front Upper/Lower and Rear Upper/Lower Links with TRA5347 Rod ends and balls.
Link Lengths (Capra Axles / Element Axles / VP F10 Axles): These measurements are Eye-to-Eye
Front Lower Links: 81mm (Straight)
Front Upper Links: 72mm (Straight)
Rear Lower Links: 178mm (Double 22 degree bend 36mm from link eye)
Rear Upper Links: 154mm (Single 22 degree bend 36mm from link eye)
I recommend a nice set of 6mm Brass Lowers and Delrin Upper Links or TI Links with brass on the Axle to adjust weight/bias. This keeps the truck light but not so light you tun into traction issues with most standard foams, and Mini-T Type Springs. Keep in mind, the less the truck weighs, more turning will be required on your tires, foams, and spring-rates.
IMPORTANT: Do not use power drivers on 3D printed parts. Over tightening printed parts and cause premature cracking and crushing. Always ensure you hardware will not bottom out in the screw pocket. This can also cause at 3D printed part to break prematurely.
Printed Parts - These parts will be printed in Black (Unless otherwise requested) using advances slicing methods for maximum strength. All 3D printed parts come with a lifetime replacement guarantee. If you break a part, simply send us a photo and your order number. The photo is simply to evaluate for common issues and help identify potential improvements to existing designs.
Contact us @ Sales@spare-timehobbies.com or PM us @ Spare-Time Hobbies on Face Book.