Proline Power Wagon Body (PRO3499-00): Interior

These parts are designed to fit the Proline Power Wagon Body (PRO3499-00). https://www.prolineracing.com/bodies/1946-dodge-po...
The parts are not a replica of the real parts. They are custom stylized and will fit the body.

**********READ BEFORE ORDERING**********
This listing is for the bench w/door trim and dash components only. All parts will be printed in the same color. Default color is white to make painting/finish easier.

The interior was designed around the Element Stealth-X Transmission for maximum clearance. On the V1W Chassis the Bench seat was mounted 30mm below the molded line on the door. The bench is designed to mount at any vertical position you feel is needed for optimal clearance. Some grinding may be required on the front bottom of the seat to clear some transmissions.

Mounting: The dash and bench are designed to be mounted with 2x6mm screws with exterior trim plates to prevent the screw head from pulling through the body. Alternatively you can fix them both with your choice of tape or glue.

---

Due to the nature of 3D printing, items may contain tiny visual blemishes. Items may require some trimming and painting for optimal visual appeal/fit; similar to what you would expect to do with model parts.

---

IMPORTANT: Do not use power drivers on 3D printed parts. Over tightening printed parts and cause premature cracking and crushing. Always ensure you hardware will not bottom out in the screw pocket. This can also cause at 3D printed part to break prematurely.

Printed Parts - These parts will be printed in Black (Unless otherwise requested) using advances slicing methods for maximum strength. All 3D printed parts come with a lifetime replacement guarantee. If you break a part, simply send us a photo and your order number. The photo is simply to evaluate for common issues and help identify potential improvements to existing designs.

Contact us @ Sales@spare-timehobbies.com or PM us @ Spare-Time Hobbies on Face Book.