JD Hero: 6.5mm Suspension Lift Kit

Suspension Lift

This bundle includes the files needed to lift your Body on the Frame Rails.

PRINT IN PETG, ABS or NYLON for best results.

This bundle will lift your Suspension 6.5mm front/Rear.

The Front Lift is achieved similarly to a leveling kit for a 1:1 pickup. The front Shock Spacer will mount on top of the front shock. The spacers require 8x 2x12mm hex screws to remount the shock to the stock hoop.

The Rear Lift Requires 4x 3x25mm Cap Screws to attach the rear spring lift.

---

Due to the nature of 3D printing, items may contain tiny visual blemishes. Items may require some trimming and painting for optimal visual appeal/fit; similar to what you would expect to do with model parts.

---

IMPORTANT: Do not use power drivers on 3D printed parts. Over tightening printed parts and cause premature cracking and crushing. Always ensure you hardware will not bottom out in the screw pocket. This can also cause at 3D printed part to break prematurely.

Printed Parts - These parts will be printed in Black (Unless otherwise requested) using advances slicing methods for maximum strength. All 3D printed parts come with a lifetime replacement guarantee. If you break a part, simply send us a photo and your order number. The photo is simply to evaluate for common issues and help identify potential improvements to existing designs.

Contact us @ Sales@spare-timehobbies.com or PM us @ Spare-Time Hobbies on Face Book.