Incognito Mount (Selector) Body Clip Free Mounting

*** VERIFY YOUR POST SEPARATION MEASUREMENT AND BRAND PRIOR TO ORDERING (CENTER TO CENTER) ***
These mounts have been slowly added to over the last 8 years and I can not find my list that shows all the combinations by rig that I maintained. I no longer have all the rigs to confirm the different combinations. The listed "Brand" is for the body post from that company

To determine what option you need, please measure center to center of your body post. These may fit other trucks that are not listed if the measurements are the same.

NOTE: You will need to lower your body posts 1-3 holes to achieve the same mounting position you had prior to adding the Incognito mount. This may require cutting off part of the bottom of the body post.

Incognito mounts are attached to the body posts with 2 - 2x12mm screws. To fix the body to the chassis, simply apply your choice of Velcro or Magnets to the Incognito Mount and the inside of the RC body. Best results are achieved when the body is "boxed" in from lateral moment with rigid bumpers, sliders or inner fenders. (Screws/Velcro/Magnets are an ADD ON OPTION)

Mounts are designed for specific rigs though they may work with others if the center to center post measurement are the same or +/- 1mm. Listed below are the current designed incognitos:

Universal Single
AE Element - 70mm, 87.5mm
Ascender - 70mm, 87.5mm
Axial - 55mm, 72mm, 87.5mm
HPI Venture - 64mm, 73mm
Sakura D3 CS Drift - 100mm , 110mm
TRX-4 - 51mm, 71mm, 81mm

If you need a custom option or have a rig not listed, please message is with the center to center body post measurements (in millimetres) the diameter of the top of the body post and a photo of the body post and we can design it for you.

---

Due to the nature of 3D printing, items may contain tiny visual blemishes. Items may require some trimming and painting for optimal visual appeal/fit; similar to what you would expect to do with model parts.

---

IMPORTANT: Do not use power drivers on 3D printed parts. Over tightening printed parts and cause premature cracking and crushing. Always ensure you hardware will not bottom out in the screw pocket. This can also cause at 3D printed part to break prematurely.

Printed Parts - These parts will be printed in Black (Unless otherwise requested) using advances slicing methods for maximum strength. All 3D printed parts come with a lifetime replacement guarantee. If you break a part, simply send us a photo and your order number. The photo is simply to evaluate for common issues and help identify potential improvements to existing designs.

Contact us @ Sales@spare-timehobbies.com or PM us @ Spare-Time Hobbies on Face Book.