STL (DIY 3DP) - ARRMA Mojave Grom: Setup Station

ARRMA Mojave Grom: Setup Station

The ARRMA MOJAVE and Typhoon Groms are a great small-scale platform for beginners looking to get into racing. This setup station will help you tune your Toe and Camber once you add the adjustable links for your A-Arms and Steering Linkage. This setup station will take the guesswork out of getting your initial setup close.

To Use: First set Zero Camber, then Zero Toe (Measure the distance from left to right in the toe marks with a ruler on the front side and the back side, they should match for Zero Toe. If you want Toe in (More stable on high speed straights), lengthen your connecting rod to cause the front tires to point in. 1-2 Degrees is a good place to start. If you want Toe out (More agile on a tight course) Shorten your connecting rod to cause the front tires to point in.

Camber is how much your tires lean in towards the truck, and it can help reduce traction loss while gaining traction where needed to have a more planted feel as you go around the corners.

Included: 2x Round Rear Disks (12mm Hex), 2x Front Plates (12mm Hex), 0, 1, 2, 3 Degree Check Wedges

Due to the nature of 3D printing, items may contain tiny visual blemishes. Items may require some trimming and painting for optimal visual appeal/fit; Similar to what you would expect to do with model parts.

Pay-Pal - CONFIRM YOUR VERIFIED SHIPPING ADDRESS
Spare-Time Hobbies will ship to your CONFIRMED PayPal address only if paying through PayPal. Please confirm your shipping address is correct prior to making payment. If your package is shipped to the wrong address because you failed to confirm your address, I will do everything in my power to initiate a package intercept, divert, or return to sender. These services are provided by USPS before delivery at a cost. The buyer will pay all associated costs with the intercept, divert, or return to sender, along with the reshipping costs involved. If you choose to return an item successfully intercepted or returned, you will receive a full refund, less the cost of the package intercept service.

Lost Packages
All lost package resolutions will be handled through USPS. I will assist by any means necessary, along with replacing the lost item at a reduced or no cost, depending on availability. Uninsured packages will not be replaced.

IMPORTANT: Do not use power drivers on 3D printed parts. Over-tightening printed parts can cause premature cracking and crushing. Always ensure your hardware will not bottom out in the screw pocket. This can also cause a 3D printed part to break prematurely.

Printed Parts - These parts will be printed in Black (Unless otherwise requested) using advanced slicing methods for maximum strength. All 3D printed parts come with a lifetime replacement guarantee. If you break a part, simply send us a photo and your order number. The photo is simply to evaluate for common issues and help identify potential improvements to existing designs.

Contact us @ Sales@spare-timehobbies.com or PM us @ Spare-Time Hobbies on Facebook.