IMAGE DISPLAYED IN WHITE FOR PHOTOGRAPHIC PURPOSES ONLY. PRODUCT WILL BE BLACK.
The inspiration behind the boot came from not wanting to simply cut up the stock rubber boot should I decided to put the factory seat belts back in and remove my Ace Racing 4 Point Harness. This boot will help keep the mud and water from leaking into the center console area.
Confirmed Fitment: 2020 S900
Fits Polaris Part# (ASM-CONSOLE, WARNDECAL, BLK 2637015-070)
Boot Fits opening with the dimensions of (40mm x 82.5mm and 4mm thick)
Boot Fits Webbing Up to 2in Wide and 4mm thick
What you get: You will receive two dust boots printed in Black TPU.
NOTE: Webbing thicker than 4mm (2mm doubled up) will be a tight fit.
This products is 3D printed from TPU (Flexible Polyurethane) Filament
IMPORTANT: Do not use power drivers on 3D printed parts. Over tightening printed parts and cause premature cracking and crushing. Always ensure you hardware will not bottom out in the screw pocket. This can also cause at 3D printed part to break prematurely.
Printed Parts - These parts will be printed in Black (Unless otherwise requested) using advances slicing methods for maximum strength. All 3D printed parts come with a lifetime replacement guarantee. If you break a part, simply send us a photo and your order number. The photo is simply to evaluate for common issues and help identify potential improvements to existing designs.
Contact us @ Sales@spare-timehobbies.com or PM us @ Spare-Time Hobbies on Face Book.