JD Hero: Fender Liner

Fender Liner

This is a fender liner for the front of your HERO Truck. This will help block the view of your electronics under the hood and help keep the dirt from being slung up onto the electronics from your wheels.

NOTE: ONE FILE HAS BEEN PROVIDED, MIRROR THE FILE IN YOUR SLICER TO PRINT THE OTHER SIDE.

TO MOUNT: Remove one screw from the headlight mount and the door hinge. You can see in the photo the two I removed. You will need two 3x12mm screws to reattach the fenders to the mounting location. There are two holes on the liner back that you can use to trim and mount a piece of rubber allowing it to hang down over the frame rail to help seal it up a little better.

---

Due to the nature of 3D printing, items may contain tiny visual blemishes. Items may require some trimming and painting for optimal visual appeal/fit; similar to what you would expect to do with model parts.

---

IMPORTANT: Do not use power drivers on 3D printed parts. Over tightening printed parts and cause premature cracking and crushing. Always ensure you hardware will not bottom out in the screw pocket. This can also cause at 3D printed part to break prematurely.

Printed Parts - These parts will be printed in Black (Unless otherwise requested) using advances slicing methods for maximum strength. All 3D printed parts come with a lifetime replacement guarantee. If you break a part, simply send us a photo and your order number. The photo is simply to evaluate for common issues and help identify potential improvements to existing designs.

Contact us @ Sales@spare-timehobbies.com or PM us @ Spare-Time Hobbies on Face Book.