Axial Ryft: HC Skid v1

Fits Axial Ryft - Includes Required Hardware (Some hardware will be reused from the kit)

Modifications: You will need to trim the esc box brace flat with the bottom of the box as depicted in the photo in the description.

The Ryft HC Skid will raise the bottom of the skid to just about in line with the tube frame bottom. The upper links will be attached to the 4mm thick Aluminum spines (link riser). When installing the Skid, you must remove the spacer plate under the ESC and fix the stock ESC directly to the transmission. The spacer plate is not needed.

NOTE: DUE to the tight space constraints, motor size is limited to the size of the stock motor or smaller.

---

Due to the nature of 3D printing, items may contain tiny visual blemishes. Items may require some trimming and painting for optimal visual appeal/fit; similar to what you would expect to do with model parts.

---

IMPORTANT: Do not use power drivers on 3D printed parts. Over tightening printed parts and cause premature cracking and crushing. Always ensure you hardware will not bottom out in the screw pocket. This can also cause at 3D printed part to break prematurely.

Printed Parts - These parts will be printed in Black (Unless otherwise requested) using advances slicing methods for maximum strength. All 3D printed parts come with a lifetime replacement guarantee. If you break a part, simply send us a photo and your order number. The photo is simply to evaluate for common issues and help identify potential improvements to existing designs.

Contact us @ Sales@spare-timehobbies.com or PM us @ Spare-Time Hobbies on Face Book.