Element RC Zuul: Interior

This item gives you an interior for the Element RC Zuul Body. You get the cage, dash, two seats, and an optional driver.

The cage has an open bottom design. If you plan to use this cage in a competition that requires a full floor, you can secure a floor to the bottom of the cage with 4 - M2.5x6 Screws. The floor can be made of cloth, plastic sheet, lexan or any other desired material.

Note: All parts will be printed in the same color. The Driver will be printed in white to make painting easier.

Hardware: 2 - M3x8 Flat, 1 - M3x10 Button, 6 - M2.5x10

Needed: Glue to fix cage together, double sidded tape to attach the cage to the body

Modification: You will need to drill 4 holes to mount the net brackets with the supplied M3x10 screws.

Due to the nature of 3D printing, printed items may contain tiny blemishes. Trimming and painting may be required for best fit and finish.

IMPORTANT: Do not use power drivers on 3D prints. Over tightening parts and cause cracking, crushing, and stripping. Driving screws too fast can cause heat that can make a part to break prematurely.

sales@spare-timehobbies.com | Facebook: Spare-Time Hobbies