Screw, Your Body Mount

This product was originally designed to work with the V1S Comp V2 chassis but will work on any chassis with a 5mm or 6mm diameter cross brace.

Bracket will be Black.

Fits: 5mm or 6mm diamever chassis brace

Modifications Required: Use a small piece of double sided tape to help prevent your body mount from sliding or spinning on the Aluminum Brace.

What you get: 2 - Clamping Brackets, 4 - M3x8 Flat, 2 - M6x20 Nylon Screw, 4 - M6, Nylon Nuts

The "Screw" your body mount is designed to clamp a flat tip counter sunk nylon screw to your existing chassis brace (5mm or 6mm) in diameter. You can then use the two provided nuts to adjust the hight of the body and then secure it to the screw eliminating the need for body clips or body posts.

You will have a total of 16mm or hight adjustment. If too much of the nylon screw sticks outside the body, simply cut the screw to length with a hobby knife.

---

Due to the nature of 3D printing, items may contain tiny visual blemishes. Items may require some trimming and painting for optimal visual appeal/fit; similar to what you would expect to do with model parts.

---

IMPORTANT: Do not use power drivers on 3D printed parts. Over tightening printed parts and cause premature cracking and crushing. Always ensure you hardware will not bottom out in the screw pocket. This can also cause at 3D printed part to break prematurely.

Printed Parts - These parts will be printed in Black (Unless otherwise requested) using advances slicing methods for maximum strength. All 3D printed parts come with a lifetime replacement guarantee. If you break a part, simply send us a photo and your order number. The photo is simply to evaluate for common issues and help identify potential improvements to existing designs.

Contact us @ Sales@spare-timehobbies.com or PM us @ Spare-Time Hobbies on Face Book.