Element Gatekeeper: Window Net

The window nets are printed out of flexibil (TPU) 3D printer filament. You will receive two black window nets and two 2.5mm screws for optional mounting of the front lower corner.

You will need to undo the (5) screws around the upper part of the frame in order to install the window net. The window net loops should not be pinched in the frame, they are designed to slip over the frame. The forth mounting pint will be secured with one, 8x2.5mm screw by drilling a 2mm hole in the frame where the crossmembers join together. Alternatively, you can use a zip tie, glue or simply allow the interior insert to hold the corner in place.

---

Due to the nature of 3D printing, items may contain tiny visual blemishes. Items may require some trimming and painting for optimal visual appeal/fit; similar to what you would expect to do with model parts.

---

IMPORTANT: Do not use power drivers on 3D printed parts. Over tightening printed parts and cause premature cracking and crushing. Always ensure you hardware will not bottom out in the screw pocket. This can also cause at 3D printed part to break prematurely.

Printed Parts - These parts will be printed in Black (Unless otherwise requested) using advances slicing methods for maximum strength. All 3D printed parts come with a lifetime replacement guarantee. If you break a part, simply send us a photo and your order number. The photo is simply to evaluate for common issues and help identify potential improvements to existing designs.

Contact us @ Sales@spare-timehobbies.com or PM us @ Spare-Time Hobbies on Face Book.