Proline Coyote HP (PRO361700) Bed Side Tube Rail

Fits: PRO361700 | 1/10 Coyote HP Clear Body 12.3" Wheelbase Crawlers - LINK -
Modifications Required: Drill holes in the bed with a 2.6mm bit

These bed rails are attached with 9 - M2.5 x 6 Screws. You will need to drill holes in the top of the bed side to mount it. Tape the top plate in positon and use it as a template to determine where you will drill your holes. Mark each positon with a marker or use a bit smaller than the hole in the top plate to drill a pilot hole. Do not drill the 2.6mm hole with the top plate in place. You may damage the top plate. There are screw plates that capture the screws in the inside of the body.

---

Due to the nature of 3D printing, items may contain tiny visual blemishes. Items may require some trimming and painting for optimal visual appeal/fit; similar to what you would expect to do with model parts.

---

IMPORTANT: Do not use power drivers on 3D printed parts. Over tightening printed parts and cause premature cracking and crushing. Always ensure you hardware will not bottom out in the screw pocket. This can also cause at 3D printed part to break prematurely.

Printed Parts - These parts will be printed in Black (Unless otherwise requested) using advances slicing methods for maximum strength. All 3D printed parts come with a lifetime replacement guarantee. If you break a part, simply send us a photo and your order number. The photo is simply to evaluate for common issues and help identify potential improvements to existing designs.

Contact us @ Sales@spare-timehobbies.com or PM us @ Spare-Time Hobbies on Face Book.