JD Hero: Hub Mod

Quick Hub Fast Wheel Removal

Here's a quick HUB mod to give you easier access to remove your wheels.

Drill the center of the wheel out with a 10mm or 3/8th in drill bit.

Make sure your wheel wrench fits, Trim as necessary. Reassemble all those tiny nuts and mount the wheel

Press the Printed Hub over the Wheel Nut for a finished look.

To remove the tire, simply pop off the hub and use your wrench. (The Calipers must remain uninstalled unless you want to remove the calipers each time before the tires.

---

Due to the nature of 3D printing, items may contain tiny visual blemishes. Items may require some trimming and painting for optimal visual appeal/fit; similar to what you would expect to do with model parts.

---

IMPORTANT: Do not use power drivers on 3D printed parts. Over tightening printed parts and cause premature cracking and crushing. Always ensure you hardware will not bottom out in the screw pocket. This can also cause at 3D printed part to break prematurely.

Printed Parts - These parts will be printed in Black (Unless otherwise requested) using advances slicing methods for maximum strength. All 3D printed parts come with a lifetime replacement guarantee. If you break a part, simply send us a photo and your order number. The photo is simply to evaluate for common issues and help identify potential improvements to existing designs.

Contact us @ Sales@spare-timehobbies.com or PM us @ Spare-Time Hobbies on Face Book.