Axial Capra: 3D Printed Body Panels

Tools Needed: Heat Gun or Hair Dryer

The body panels for the Axial Capra are 3D printed flat. Once you secure them to your truck with the stock hardware, you will need to use a heat gun or good hair dryer to warm up the plastic on the middle of the hood and front of the roof to allow the plastic to form to the cage.

Bed Cap - To use the Bed Cap, you must cut off the upper cage support over the bed. It will not work with the cage supports intact.

---

Due to the nature of 3D printing, items may contain tiny visual blemishes. Items may require some trimming and painting for optimal visual appeal/fit; similar to what you would expect to do with model parts.

---

IMPORTANT: Do not use power drivers on 3D printed parts. Over tightening printed parts and cause premature cracking and crushing. Always ensure you hardware will not bottom out in the screw pocket. This can also cause at 3D printed part to break prematurely.

Printed Parts - These parts will be printed in Black (Unless otherwise requested) using advances slicing methods for maximum strength. All 3D printed parts come with a lifetime replacement guarantee. If you break a part, simply send us a photo and your order number. The photo is simply to evaluate for common issues and help identify potential improvements to existing designs.

Contact us @ Sales@spare-timehobbies.com or PM us @ Spare-Time Hobbies on Face Book.