Modular Bench Top Tool Holder

Note: When selecting your tool blocks, you can only fit 6 on one tray. We will ship what you select.

Here's a configurable tool holder aimed at the 1/4in drive tool users. The end two blocks screw to the base tray with an M3x8 Flat to keep them from tipping over. You can use any configuration you like.

The joiner plates in the back can hold two pairs of small pliers, lexan scissors, or other point nose tools. The 6x Hex block have a hole for a tool handle that is 26mm in diameter. This will fit the blue Team Associated, Green Helios RC, or Yellow Bowhouse RC Handle.

If you have an odd size handle, you can print a down size spacer to fit the tool a little better. You can also print a spacer to hold the pointed end of your body reamer.

In the DIY files there will be "Blank" main blocks, back spacers, and inserts for you to modify and add any other tool you may need. If need a specific modification, please contact us and we will design the new tool holder if you provide enough detail and dimensions.

What you get in this kit:

- 6x Tool blocks (Select Type)
- 5x Back Plates (Select Type)
- 1x Tray
- 2x M3x8 Flat Screws

Color Selections:

If you select two colors, I will evenly split the parts between the two colors.

---

Due to the nature of 3D printing, printed items may contain tiny blemishes. Trimming and painting may be required for best fit and finish.

IMPORTANT: Do not use power drivers on 3D prints. Over tightening parts and cause cracking, crushing, and stripping. Driving screws too fast can cause heat that can make a part to break prematurely.

---

sales@spare-timehobbies.com | Facebook: Spare-Time Hobbies