Element Bushido: Interrior

This interior fits the Element RC: Bushido in it's Stock RTR Configuration. Deviation from Stock may require some modification.

It takes 35 hours to produce a complete interior. Please assume it will take a minimum of 3 Days for your order to ship. If you do not type a color of the parts group, you will recieve the parts in the default color listed.

Update: We have added the option to have the Driver on the Right of the car for our none USA Drivers.

The interior is designed for the stock Bushido configuration (SHORT BATERY TRAY). The hand break and shifter boot have a hole in the top for and M3 Screw. The idea is to use a Ball stud or screw to complete the look of the handle.

Hardware needed: 2 - M2x5x8, 2 - M3x8, Glue. Paint

To install:

The rear of the Top Plate will mount to the rear screws for the stock role cage in the bed. The front of the Top plate will mount to the underside of the hood with either glue or the hood vent with two screws through the body. All other parts will be secured to the top plate for installation.

Optional Cage Note: The underside of the top plate and the back of the dash have registration marks for you to drill the needed holes to screw the optional cage to the dash and top plate. If you don't want the cage, there will be no holes to muddy up the look.

Dash Note: The holes in the side of the dash will capture the posts of the side mirrors. Make sure the D of the body clip is facing the front of the truck for clearance. It is possible to use only the dash mounted to the mirrors and tacked in place with some hot glue. this option is nice for those who want to make a light weight interior out of other materials and not want the weight of the 3D Printed Tub.

The body with all interior components installed will weigh about 1lb 3 oz. You may need a heaver spring weight to compensate for the added "realistic" weight.

IMPORTANT: Do not use power drivers on 3D printed parts. Over tightening printed parts and cause premature cracking and crushing. Always ensure you hardware will not bottom out in the screw pocket. This can also cause at 3D printed part to break prematurely.

Printed Parts - These parts will be printed in Black (Unless otherwise requested) using advances slicing methods for maximum strength. All 3D printed parts come with a lifetime replacement guarantee. If you break a part, simply send us a photo and your order number. The photo is simply to evaluate for common issues and help identify potential improvements to existing designs.

Contact us @ Sales@spare-timehobbies.com or PM us @ Spare-Time Hobbies on Face Book.