Axial SCX10III (RTR) Base Camp: HC Skid v1

The Base Camp High Clearance skid is a direct swap for you stock skid to gain an extra 4-5mm of ground clearance. This skid is also easier to adjust the links. The Geometry has been slightly altered and requires the front upper and lower and rear upper links to have the rod ends adjusted. Simply twist the rod end in on the upper links to adjust the dif clock angle (about 2mm Shorter). Adjust your Pan Link to realign the front axle once you have shortened the front uppers and lowers by turning the rod ends. If you make no changes to the link lengths the truck will still function however you should make these adjustments.

You will receive: 1 - Skid, 2 x Spacers, 2 x Aluminum Spines, 4 - M3 Lock Nuts, 4 - M3x18, 4 - M3x25 Studs

---

Due to the nature of 3D printing, items may contain tiny visual blemishes. Items may require some trimming and painting for optimal visual appeal/fit; similar to what you would expect to do with model parts.

---

IMPORTANT: Do not use power drivers on 3D printed parts. Over tightening printed parts and cause premature cracking and crushing. Always ensure you hardware will not bottom out in the screw pocket. This can also cause at 3D printed part to break prematurely.

Printed Parts - These parts will be printed in Black (Unless otherwise requested) using advances slicing methods for maximum strength. All 3D printed parts come with a lifetime replacement guarantee. If you break a part, simply send us a photo and your order number. The photo is simply to evaluate for common issues and help identify potential improvements to existing designs.

Contact us @ Sales@spare-timehobbies.com or PM us @ Spare-Time Hobbies on Face Book.