Element Gatekeeper: Low Profile Battery Tray Set

These trays were design specifically for the Gatekeeper but will work on other Element RC Models that use the same front and rear cross brace. You will receive both the Long and short tray in Black.

The low profile battery tray set accomplished two things. 1) fixes binding on the drive shaft up front 2) perfectly closes out the rear of the Gatekeeper cage. The rear tray had tabs in the strap slots to make it look more like rear venting if not being used as a rear battery tray. The tabs can be cut out with a hobby knife. These trays will bolt in with stock hardware.

---

Due to the nature of 3D printing, items may contain tiny visual blemishes. Items may require some trimming and painting for optimal visual appeal/fit; similar to what you would expect to do with model parts.

---

IMPORTANT: Do not use power drivers on 3D printed parts. Over tightening printed parts and cause premature cracking and crushing. Always ensure you hardware will not bottom out in the screw pocket. This can also cause at 3D printed part to break prematurely.

Printed Parts - These parts will be printed in Black (Unless otherwise requested) using advances slicing methods for maximum strength. All 3D printed parts come with a lifetime replacement guarantee. If you break a part, simply send us a photo and your order number. The photo is simply to evaluate for common issues and help identify potential improvements to existing designs.

Contact us @ Sales@spare-timehobbies.com or PM us @ Spare-Time Hobbies on Face Book.